Dexter + Chaney Introduces Spectrum Equipment Service System That Collects Data For Heavy Equipment

SEATTLE, September 1, 2009: Dexter + Chaney has introduced the Spectrum(TM) Equipment Service System ( http://www.dexterchaney.com/spectrum/ess/index.aspx) that electronically collects asset-management data for a construction company’s heavy equipment, including equipment hours, fuel usage and maintenance.

“Spectrum Equipment Service System is an answer to the critical problem of recording accurate equipment hours,” said John Chaney, Dexter + Chaney ( www.dexterchaney.com) president and co-founder. “It eliminates the time and hassle of manual data collection that results in inaccurate and unreliable asset-management information. By gathering equipment hours electronically, the company can seize control of operating costs, generate a higher return on its equipment investment and increase over-all company profitability.”

The system simplifies equipment servicing for mechanics and fuel truck drivers. They’re not required to climb into individual pieces of equipment to read the hour meter and write down the current reading. There’s also no need to keep a detailed log recording fuel for each piece of equipment. Instead, Spectrum automatically captures operating hours and fuel, thus saving time and eliminating errors in the field. Office staff does not have to re-enter long lists of hours logged and fuel used into a company’s equipment-management software.

Chaney added that Spectrum alerts the fuel truck driver when preventive-maintenance tasks are due. It also records the maintenance activity—an oil change, for example—when the fuel truck driver performs it. “Spectrum triggers maintenance activities by providing alerts, and captures the equipment meter reading when each task is performed,” said Chaney. “That combination is a huge plus for a construction company’s equipment.”

HOW IT WORKS
Spectrum Equipment Service System includes three main components: Equipment Monitor, Field Master touch screen device and Fuel Controller. The Equipment Monitor, a small device attached to each piece of machinery, records operating hours and idle hours and automatically relays that data to the Field Master each time the equipment is fueled or serviced.

The Field Master—mounted in a fuel truck or service vehicle—electronically collects data from each piece of heavy equipment via wireless RF signal. It displays and logs information with touch-screen simplicity; technicians easily see the maintenance status of each piece of equipment, and alerts remind them when a task is due. The Fuel Controller captures gallons of fuel dispensed to each piece of equipment, which enables the company to track usage and reduce fuel theft.

The Field Master uses a built-in cellular modem to relay equipment hours, fuel usage, maintenance and other data to Dexter + Chaney’s Spectrum(R) Construction Software. That gives the company easy access to equipment-related information in Spectrum for improved equipment costing and management.

Dexter + Chaney has prepared a two-minute video of Spectrum Equipment Service System in action. It can be accessed at http://www.dexterchaney.com/spectrum/ess/index.aspx

FOR INFORMATION
For information about Spectrum Equipment Service System and Spectrum Construction Software, contact Dexter + Chaney at 800-875-1400 or 206-364-1400; fax: 206-367-9613; e-mail: Email Contact; http://www.dexterchaney.com.

ABOUT DEXTER + CHANEY
More than 1,000 construction companies throughout the United States use Dexter + Chaney’s Spectrum(R) Construction Software. Spectrum includes 30 integrated modules that handle project management, construction accounting, equipment management, human resources, document imaging, service management, remote connectivity and data sharing tasks. Contractors who use Spectrum report they have improved profitability and have grown their businesses more than 300 percent without adding financial staff.

More than 10,000 total users make use of Spectrum’s Document Imaging software, which addresses a typically painful problem for construction contractors: giving management, office staff and project managers the fast, electronic access they need to important documents like contracts, change orders, time cards, invoices and others.

For more information about Dexter + Chaney or Spectrum, contact Brad Mathews, Vice President of Marketing, Dexter + Chaney, 9700 Lake City Way NE, Seattle, WA 98115-2347; phone: 800-875-1400 or 206-364-1400; fax: 206-367-9613; e-mail: Email Contact; http://www.dexterchaney.com

www.dexterchaney.com
helping construction companies grow




Review Article Be the first to review this article
Bentley: YII  LiveStream OnDemand

Featured Video
Latest Blog Posts
Alex Carrick, Chief Economist at ConstructConnectThe AEC Lens
by Alex Carrick, Chief Economist at ConstructConnect
November’s Jobs Reports – U.S. Still Upbeat; Canada Suffers Setback
Andrew WattsAECCafe Guest Blog
by Andrew Watts
Digital Pattern Books Disrupt Construction Industry
Jobs
Ecommerce Account Manager for Bright Atlas LLC at Miami Gardens, Florida
Upcoming Events
Interior Design Show at Metro Toronto Convention Centre South Building 222 Bremner Blvd Toronto Canada - Jan 16 - 19, 2020
IPEC at The Don CeSar St. Pete Beac FL - Jan 26 - 29, 2020
Conservation of Architectural Heritage (CAH) 4th Edition at Luxor - Egypt http://bit.ly/CAHLOC Luxor Egypt - Jan 31 - 3, 2020
Kenesto: 30 day trial
Bentley: Livestream On Demand
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2019 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise