Atmel's AT91SAM9G20 ARM-Based Embedded MPU Supported by Latest Mainline Linux Kernel

AT91SAM9G20 Joins Entire AT91SAM9 Family on Linux v2.6.27

ROUSSET, France, Nov. 17 /PRNewswire/ -- Atmel(R) Corporation (NASDAQ: ATML) announced today the availability of the latest Linux(R) mainline release, v2.6.27, for its 400 MHz ARM926EJ-S(TM)-based AT91SAM9G20 embedded microprocessor, and for other members of the AT91SAM9 family. The short time interval between product availability and publication in the official Linux kernel is due to the well-established Linux support for AT91SAM9 MPUs, and peripheral re-use across the product family.

A Linux distribution based on Linux v2.6.27 is available from Atmel's AT91SAM Linux portal at It includes the complete Linux v2.6.27 kernel, the Linux patch for the AT91SAM9G20-EK, device drivers, pre-built demonstrations and the Angstrom/OpenEmbedded building environment. The AT91SAM Linux portal is a gateway to a wide and growing community that provides Linux self-support for Atmel's entire ARM9(TM)-based range of embedded 32-bit microprocessors.

Alfredo Vadillo, Atmel's Managing Director for ARM(R) microcontrollers, commented, "The availability of our development of the latest Linux kernel, for the AT91SAM9 MPUs, demonstrates our commitment to support the strong market demand for Linux on AT91SAM9 product family."

Complementary products and support are available through TimeSys(R), including an embedded Linux ReadyKit for the entire AT91SAM9 series including the AT91SAM9G20. The ReadyKit comprises a pre-built Linux kernel, device drivers, a GNU-based cross toolchain, a glibc-based root filesystem complete with selected development libraries, 14 days of technical support and access to a wide range of support documentation.

About Atmel's Award-Winning AT91SAM9G20. The 400 MHz AT91SAM9G20 features Atmel's market-leading peripheral DMA (direct memory access) and distributed memory architecture that, together with the 6-layer bus matrix, enables multiple simultaneous data transfers between memories, peripherals and external interfaces without consuming CPU clock cycles. The external bus interface (EBI) is clocked at 133 MHz for high-speed transfers to off-chip memories. This architecture gives the device the high internal and external data bandwidth required by many embedded networked applications.

Networking and communications requirements are met by an Ethernet 10/100 Base T MAC, seven USARTs, 12M bps USB Full Speed Dual Host and Device ports, dual SPI, SSC and Two-Wire Interface (TWI). Linux device drivers are available for all these peripherals. Image sensing requirements are met by a fully integrated Image Sensor Interface (ISI).

Power consumption in full-power operating mode at 400 MHz with all peripherals turned on is only 80 mW. The AT91SAM9G20 also features four reduced-power modes, including Backup Mode where the main power supply is off and the device power consumption is sufficiently low (9uW) for an extended period of operation under battery supply.

About Atmel

Atmel is a worldwide leader in the design and manufacture of microcontrollers, advanced logic, mixed-signal, nonvolatile memory and radio frequency (RF) components. Leveraging one of the industry's broadest intellectual property (IP) technology portfolios, Atmel is able to provide the electronics industry with complete system solutions focused on consumer, industrial, security, communications, computing and automotive markets.

(C) 2008 Atmel Corporation. All Rights Reserved. Atmel(R), Atmel logo and combinations thereof, and others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. ARM(R) and others are registered trademarks or trademarks of ARM Ltd. Other terms and product names may be trademarks of others.


Atmel's AT91SAM9G20 product information may be retrieved at

For further information on Atmel's Linux portal for AT91SAM products, go to

For further information on TimeSys's ReadyKits, go to

     Press Contacts:
     Peter Bishop, Communications Manager, Atmel Rousset
     Tel: +33 (0)4 42 53 61 50, Email:
     Helen Perlegos, Public Relations
     Tel: (+1) 408 487-2963, Email:

Web site:


Review Article Be the first to review this article
Featured Video
Latest Blog Posts
Alex Carrick, Chief Economist at ConstructConnectThe AEC Lens
by Alex Carrick, Chief Economist at ConstructConnect
Clock Winds Down on Homebuilding Parties in U.S. and Canada
Dr. Biplab SarkarVectorworks Blog
by Dr. Biplab Sarkar
See How You Can Design Without Limits With Vectorworks
Senior Highway Engineer for RS&H at Jacksonville, Florida
ASIC Architects and Hardware Engineers at D. E. Shaw Research for D. E. Shaw Research at New York, New York
Transit GIS analyst/planner for Jarrett Walker and Associates at Portland, Oregon
Product Design Engineer - Softgoods for Apple Inc at Cupertino, California
Director, Industrial Machinery Solutions- SISW PLM for Siemens AG at Livonia, Michigan
Upcoming Events
The Buildings Show 2021 at Metro Toronto Convention Centre – South Hall. Toronto Canada - Dec 1 - 3, 2021
SIGGRAPH Asia 2021 at Tokyo, Japan Japan - Dec 14 - 17, 2021
Utopian and Sacred Architecture Studies (USAS) - 2nd Edition at University Way, Dockland Campus London, E16 2RD, UK London --Choose One-- United Kingdom - Jun 14 - 15, 2022

© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise