IoT in Construction Market to Reach $19.03 Bn, Globally, by 2027 at 14.0% CAGR: Allied Market Research

Efficient safety management on construction sites, surge in productivity, and labor shortage drive the growth of the global IoT in Construction Market in BFSI

PORTLAND, Ore., Nov. 4, 2020 — (PRNewswire) — Allied Market Research published a report, titled, "IoT in Construction Market by Application (Machine Control, Site Monitoring, Fleet Management, Wearables, and Others), End User (Residential and Non-residential), and Component (Hardware, Software, Connectivity, and Services): Global Opportunity Analysis and Industry Forecast, 2020–2027" According to the report, the global IoT in Construction market generated $ 8.17 billion in 2019, and is expected to generate $19.03 billion by 2027, witnessing a CAGR of 14.0 % from 2020 to 2027.

Allied Market Research Logo

Drivers, restraints, and opportunities

Efficient safety management on construction sites, surge in productivity, and labor shortage drive the growth of the global IoT in Construction Market. However, rise in security threats in connected devices hinders the market growth. On the other hand, robotics in construction and resource and waste optimization would offer new opportunities throughout the forecast period.

COVID-19 Scenario-

  • The halt in international trade and prolonged lockdowns have negatively impacted the IoT in construction market.
  • In addition, the construction processes all over the world were put on hold. This has been another major issue that affected the market.
  • However, various countries are implementing relaxations on the regulations to maintain economic status, thereby allowing the industries to proceed further.

Download Report Sample (239  Pages PDF with Insights) @ https://www.alliedmarketresearch.com/request-sample/7930

The asset monitoring segment to maintain its lead status during the forecast period-

Based on application, the asset monitoring segment accounted for the largest market share in 2019, holding nearly one-third of the total share of the global IoT in Construction Market in BFSI, and is projected to maintain its lead status throughout the forecast period. This is due to high expenditure on sensors and technologies for asset management. However, the wearable segment is estimated to portray the highest CAGR of 19.1% from 2020 to 2027, owing to increasing awareness for smart wearable to promote risk management on construction sites.

The hardware segment to maintain its dominance by 2027-

Based on component, the hardware segment held the highest market share, contributing to more than one-third of the total market share of the global IoT in Construction Market in 2019, and is expected to maintain its dominance by 2027. This is due to high price of technology related to IoT embedded products. However, the connectivity segment is estimated to witness the largest CAGR of 15.8% during the forecast period, owing to government initiatives for development of connectivity infrastructure.

Get detailed COVID-19 impact analysis on the IoT in Construction Market: https://www.alliedmarketresearch.com/request-for-customization/7930?reqfor=covid

Asia-Pacific, followed by North America, would lead the trail throughout the forecast period-

Based on region, Asia-Pacific, followed by North America, accounted for the highest contribution in terms of revenue of the global IoT in Construction Market in BFSI, contributing to more than two-fifths of the total share in 2019, and will maintain its leadership status throughout the forecast period. This is due to increased expenses on manufacturing infrastructure in countries such as China, India, Indonesia, and others. However, LAMEA is projected to grow at the highest CAGR of 16.9% from 2020 to 2027, owing to Rise in infrastructure development due to surged public private partnerships (PPPs).

Leading market players

  • Topcon Corporation
  • Hilti Corporation
  • Autodesk, Inc.
  • Oracle Corporation
  • Hexagon AB
  • CalAmp Corporation
  • Trimble, Inc.
  • Pillar Technologies Inc.
  • Triax Technologies, Inc.
  • AOMS Technologies

Interested in Procure Data? Visit Here:  https://www.alliedmarketresearch.com/iot-in-construction-market/purchase-options

Access AVENUE- A Subscription-Based Library (Premium on-demand, subscription-based pricing model) at: https://www.alliedmarketresearch.com/library-access

Avenue is a user-based library of global market report database, provides comprehensive reports pertaining to the world's largest emerging markets. It further offers e-access to all the available industry reports just in a jiffy. By offering core business insights on the varied industries, economies, and end users worldwide, Avenue ensures that the registered members get an easy as well as single gateway to their all-inclusive requirements.

Avenue Library Subscription | Request for 14 days free trial of before buying:

https://www.alliedmarketresearch.com/avenue/trial/starter

Similar Reports We Have:

Construction Equipment Market: Construction equipment market size is expected to reach $261,047 million in 2027, growing at a CAGR of 4.3% from 2020 to 2027.

Construction Drone Market: Construction drone market size is projected to reach $11,968.6 million by 2027, registering a CAGR of 15.4% from 2020 to 2027.

Construction & Demolition Waste Recycling Market: Global construction & demolition waste recycling market is expected to reach $149,190.9 million by 2027, registering a CAGR of 2.7% from 2020 to 2027.

Demolition Robot Market: Demolition robot market is projected to reach $633,199.3 thousand by 2027, registering a CAGR of 16.2% from 2020 to 2027.

Construction & Manufacturing Industry: Construction & manufacturing industry market is expected to reach $14.9 trillion by 2022, growing at a CAGR of 5.2% from 2020 to 2022.

Construction Lasers Market: Global construction lasers market is expected to reach $3,363.0 million by 2025, growing at a CAGR of 4.4% from 2018 to 2025.

Pre-Book Now with 12% Discount:

Construction and Mining Equipment Market - Global Opportunity Analysis and Industry Forecast, 2020-2027

Global Construction Lifts Market - Global Opportunity Analysis and Industry Forecast, 2020-2027

Construction Materials Testing Equipment Market - Global Opportunity Analysis and Industry Forecast, 2020-2027

About Us:

Allied Market Research (AMR) is a full-service market research and business-consulting wing of Allied Analytics LLP based in Portland, Oregon. Allied Market Research provides global enterprises as well as medium and small businesses with unmatched quality of "Market Research Reports" and "Business Intelligence Solutions." AMR has a targeted view to provide business insights and consulting to assist its clients to make strategic business decisions and achieve sustainable growth in their respective market domains. AMR offers its services across 11 industry verticals including Life Sciences, Consumer Goods, Materials & Chemicals, Construction & Manufacturing, Food & Beverages, Energy & Power, Semiconductor & Electronics, Automotive & Transportation, ICT & Media, Aerospace & Defense, and BFSI.

We are in professional corporate relations with various companies and this helps us in digging out market data that helps us generate accurate research data tables and confirms utmost accuracy in our market forecasting. Each and every data presented in the reports published by us is extracted through primary interviews with top officials from leading companies of domain concerned. Our secondary data procurement methodology includes deep online and offline research and discussion with knowledgeable professionals and analysts in the industry.

Contact us:

David Correa
5933 NE Win Sivers Drive
#205, Portland, OR 97220

1 | 2  Next Page »



Review Article Be the first to review this article

Bentley: YII2020

Featured Video
Latest Blog Posts
Alex Carrick, Chief Economist at ConstructConnectThe AEC Lens
by Alex Carrick, Chief Economist at ConstructConnect
October’s Nonresidential Construction Starts -28% Ytd, but Level M/M
Jobs
BIM Modeler for Woolpert at Oakbrook Terrace, Illinois
Upcoming Events
Architecture, Engineering, and Technology (AET) - 4th Edition at Online Conference Egypt - Jan 11 - 13, 2021
Architecture, Engineering, and Technology (AET) Conference at Online event Alexandria Egypt - Jan 11 - 13, 2021
DCW - Digital Construction Week at Excel London United Kingdom - May 19 - 20, 2021
Kenesto: 30 day trial
CADalog.com - Countless CAD add-ons, plug-ins and more.



© 2020 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise