TTM Technologies, Inc. Reports Fiscal First Quarter 2020 Results

SANTA ANA, Calif. , April 29, 2020 (GLOBE NEWSWIRE) -- TTM Technologies, Inc. (NASDAQ:TTMI), a leading global printed circuit board (“PCB”) and radio frequency (“RF”) components manufacturer, today reported results for the first quarter of fiscal 2020, which ended on March 30, 2020.  On April 19th, TTM completed the  previously announced sale of its Mobility business unit.  The operating results and related assets and liabilities of the Mobility business under US GAAP are presented as discontinued operations for all periods. To facilitate the comparison of TTM’s results to prior periods and to previously issued guidance, non-GAAP financial information is also provided below which includes the results of the Mobility business unit. 

First Quarter 2020 Highlights

  • GAAP net sales were $497.6 million
  • Non-GAAP net sales were $610.8 million
  • GAAP net loss of $3.2 million, or ($0.03) per diluted share
  • Non-GAAP net income was $19.6 million, or $0.18 per diluted share, inclusive of $1.9 million in foreign exchange gains
  • Cash flow from operations of $27.9 million
  • Announced restructuring of Electro-Mechanical Solutions (E-MS) Business unit

First Quarter 2020 GAAP Financial Results
Net sales for the first quarter of 2020 were $497.6 million, compared to $536.4 million in the first quarter of 2019 and $535.7 million in the fourth quarter of 2019.

GAAP operating income for the first quarter of 2020 was $16.2 million, compared to $30.1 million in the first quarter of 2019 and $29.4 million in the fourth quarter of 2019. 

GAAP net loss for the first quarter of 2020 was $3.2 million, or ($0.03) per diluted share.  This compares to net income of $6.2 million, or $0.06 per diluted share in the first quarter of 2019, and net income of $7.3 million, or $0.07 per diluted share, in the fourth quarter of 2019.    

First Quarter 2020 Non-GAAP Financial Results
Net sales for the first quarter of 2020 were $610.8 million, compared to $620.2 million in the first quarter of 2019 and $719.3 million in the fourth quarter of 2019.
                                                                                                                                            
On a non-GAAP basis, net income for the first quarter of 2020 was $19.6 million, or $0.18 per diluted share. This compares to non-GAAP net income of $16.4 million, or $0.16 per diluted share, for the first quarter of 2019 and $43.9 million, or $0.41 per diluted share, in the fourth quarter of 2019.

Adjusted EBITDA for the first quarter of 2020 was $82.1 million, or 13.4 percent of net sales, compared to adjusted EBITDA of $78.5 million, or 12.7 percent of net sales, for the first quarter of 2019 and $111.3 million, or 15.5 percent of net sales, for the fourth quarter of 2019.

“As we start the second quarter, all of our manufacturing facilities remain operational and we are particularly proud of our urgent production of printed circuit boards used for critical medical needs.  I want to recognize all of our employees for their tremendous efforts in support of our customers during these challenging times,” said Tom Edman, CEO of TTM.  “TTM’s first priority remains the health and safety of our employees and we have taken proactive measures against the spread of COVID-19 in all of our facilities.  We have implemented enhanced cleaning, social distancing practices, temperature checks, and masks among other measures.” 

“Regarding our financial results for the first quarter, TTM delivered revenue above the midpoint and earnings above the previously guided range despite a government mandated shutdown of our manufacturing plants in China as a result of COVID-19.  The year over year growth we experienced in the aerospace and defense, cellular and computing end markets partially offset weakness in our automotive and networking and communications end markets.”   

Business Outlook
Looking ahead, we believe that COVID-19 may cause end demand weakness, supply chain disruptions, as well as inefficiencies with our own production.  Taking this into consideration, TTM estimates that revenue for the second quarter of 2020 will be in the range of $520 million to $560 million, and non-GAAP net income will be in the range of $0.11 to $0.17 per diluted share, which includes the financial impact of the Mobility business unit until it was sold on April 17th.  

Live Webcast/Conference Call
TTM will host a conference call and webcast to discuss first quarter 2020 results and the second quarter 2020 outlook on Wednesday, April 29, 2020, at 4:30 p.m. Eastern Time (1:30 p.m. Pacific Time).  The conference call will include forward-looking statements.

Telephone access is available by dialing domestic 800-309-1256 or international 720-543-0314 (ID 557290).  The conference call also will be webcast on TTM’s website at www.ttm.com.

To Access a Replay of the Webcast
The replay of the webcast will remain accessible for one week following the live event on TTM’s website at www.ttm.com.

About TTM
TTM Technologies, Inc. is a leading global printed circuit board manufacturer, focusing on quick-turn and volume production of technologically advanced PCBs, backplane assemblies and electro-mechanical solutions as well as a global designer and manufacturer of RF and microwave components and assemblies. TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at www.ttm.com.

Forward-Looking Statements
This release contains forward-looking statements that relate to future events or performance. TTM cautions you that such statements are simply predictions and actual events or results may differ materially. These statements reflect TTM's current expectations, and TTM does not undertake to update or revise these forward looking statements, even if experience or future changes make it clear that any projected results expressed or implied in this or other TTM statements will not be realized. Further, these statements involve risks and uncertainties, many of which are beyond TTM's control, which could cause actual results to differ materially from the forward-looking statements. These risks and uncertainties include, but are not limited to, the impact of COVID-19, general market and economic conditions, including interest rates, currency exchange rates and consumer spending, demand for TTM's products, market pressures on prices of TTM's products, warranty claims, changes in product mix, contemplated significant capital expenditures and related financing requirements, TTM's dependence upon a small number of customers and other factors set forth in the "Risk Factors" and "Management's Discussion and Analysis of Financial Condition and Results of Operations" sections of the Company's public reports filed with the SEC.

About Our Non-GAAP Financial Measures
This release includes information about TTM’s adjusted EBITDA, non-GAAP net income and non-GAAP earnings per share, all of which are non-GAAP financial measures. TTM presents non-GAAP financial information to enable investors to see TTM through the eyes of management and to provide better insight into TTM’s ongoing financial performance. 

A material limitation associated with the use of the above non-GAAP financial measures is that they have no standardized measurement prescribed by GAAP and may not be comparable to similar non-GAAP financial measures used by other companies.  TTM compensates for these limitations by providing full disclosure of each non-GAAP financial measure and reconciliation to the most directly comparable GAAP financial measure.  However, the non-GAAP financial measures should not be considered in isolation from, or as a substitute for, financial information prepared in accordance with GAAP.

With respect to the Company’s outlook for non-GAAP net income per diluted share, we are unable to predict with reasonable certainty or without unreasonable effort certain items that may affect a comparable measure calculated and presented in accordance with GAAP. Our expected non-GAAP net income per diluted share excludes primarily the future impact of restructuring actions, impairment charges, unusual gains and losses, and tax adjustments. These reconciling items are highly variable and difficult to predict due to various factors outside of management’s control and could have a material impact on our future period net income per diluted share calculated and presented in accordance with GAAP.  Accordingly, a reconciliation of non-GAAP net income per diluted share to a comparable measure calculated and presented in accordance with GAAP is not available without unreasonable effort and has not been provided.

Contacts:

1 | 2  Next Page »



Review Article Be the first to review this article
Featured Video
Latest Blog Posts
Alex Carrick, Chief Economist at ConstructConnectThe AEC Lens
by Alex Carrick, Chief Economist at ConstructConnect
From Within the Herd (June 1, 2020) – Word Processing vs Meat Processing
Jobs
ROV Pilot II for TechnipFMC at Houston,, Texas
GIS Analyst #14713 for State of Missouri at Jefferson City,, Missouri
Mechanical Designer for TechnipFMC at Houston,, Texas
Geographic Information System Analyst II for State of Idaho at Boise, Idaho
Upcoming Events
BUILDINGSNY -postponed June 17-18, 2020 at Javits Center New York City NY - Jun 17 - 18, 2020
Urban Planning & Architectural Design for Sustainable Development – 5th Edition at Rome,Italy Roma Tre University Rome Italy - Jul 7 - 9, 2020
Cities’ Identity Through Architecture and Arts – 4th Edition at Rome,Italy Rome Italy - Jul 7 - 9, 2020
AEC Next Technology Expo + Conference (NEW DATE), at McCormick Place Chicago IL - Jul 27 - 29, 2020
Kenesto: 30 day trial
Context Capture
CADalog.com - Countless CAD add-ons, plug-ins and more.



© 2020 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise