Lockheed Martin Receives Four Manufacturing Leadership Awards

FORT WORTH, Texas, April 5, 2017 — (PRNewswire) — Lockheed Martin's (NYSE: LMT) innovation in manufacturing technology led to four awards from the Manufacturing Leadership Council.

Now in its 13th year, the Manufacturing Leadership Awards honor manufacturing companies and individual manufacturing leaders that are shaping the future of global manufacturing.

"It is an honor to receive these awards for Engineering and Production Technology Leadership," said Joe Rappisi, vice president for Production Operations at Lockheed Martin Aeronautics. "Lockheed Martin employees are constantly looking for improvements and cost efficient ways of doing business. These awards confirm these individuals' desire to drive change."

Rick Luepke, a Lockheed Martin engineering Fellow, was awarded the Visionary Leadership Award, and Lockheed Martin won three awards in the Engineering and Production Technology Leadership category for its ultrasonic hole cutting tool, forced mechanical oscillation drilling technology and mold-in-place inlet coatings project.

Luepke was recognized for his extensive impact and achievements in the manufacturing industry. He has 12 patents, either awarded or under file with the United States Patent and Trademark Office. In addition to his pioneering achievements and awards, Luepke has integrated more than $100 million of capital equipment into Lockheed Martin's production facility, while delivering program savings exceeding $100 million. His leadership led to the development and integration of multiple cutting-edge breakthroughs in technology and manufacturing processes, like the mold-in-place system, where he served as the chief architect. 

The manufacturing process for military aircraft requires drilling thousands of holes through various substrate materials in order to access fasteners holes used to attach panels. The previous practice for cutting these holes resulted in excessive debris, required the use of a downdraft table and typically resulted in a dull cutter after only a few holes. Lockheed Martin participated in an Office of Naval Research/Defense-wide Manufacturing Science & Technology funded Contract Research and Development (CRAD) effort to develop a portable, hand held ultrasonic hole cutting tool capable of cutting fastener access holes in the various substrates. Through the CRAD effort and a production pilot, followed by design optimization, the team released production units that are capable of reducing the per hole cut time by 85 percent.

Deep stack drilling can be defined as drilling through mixed materials with continuous drilling through material that is 1.5" and deeper. Difficult to drill aerospace materials, stacked in combinations, combined with engineering requirements and large chip formation from drilling make deep stack drilling a challenging task. With forced mechanical oscillation drilling, which leverages a controllable mechanical oscillation, large chips are broken into small, lightweight, manageable chips which are easily evacuated. Integration of this new technology has enabled Lockheed Martin to significantly decrease drill times, improve hole quality and increase tool life for all deep stack applications.

The mold-in-place inlet coatings project fuses collaborative robotics, advanced metrology and conformable composite tooling into a system that can mold coatings directly to an aircraft's contoured surface. Originating from an Air Force Research Laboratory funded CRAD, this system serves as an alternative to robotically sprayed coatings, which contain high levels of volatile organic compounds, require significant preparation and lengthy application times in a spray booth. The integrated advanced metrology technology provided a solution that allows the robot to establish its position relative to the aircraft and adjust its kinematics to place the mold tool accurately.  This new coating system and process reduces touch labor 50 percent and allows concurrent work to be performed on the aircraft eliminating a bottle neck for F-35 production.

For additional information, visit our website: www.lockheedmartin.com/us/what-we-do/emerging/advanced-manufacturing.html

About the Manufacturing Leadership Council
The Manufacturing Leadership Council's mission is to enable manufacturing executives to achieve transformational growth for themselves, their companies, and the industry at large through enlightened leadership. In support of this, the Council focuses on the intersection of advanced technologies and the business, identifying growth and improvement opportunities in the operation, organization and leadership of manufacturing enterprises along their journey to Manufacturing 4.0. The Council delivers thought leadership, networking, and services around a member-defined set of Critical Issues that are shaping the future of manufacturing, including an invitation-only executive organization of over 800 members; the annual Manufacturing Leadership Summit; the Manufacturing Leadership Awards; and the thought-leading Manufacturing Leadership Journal.

About Lockheed Martin
Headquartered in Bethesda, Maryland, Lockheed Martin is a global security and aerospace company that employs approximately 97,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services.

 

To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/lockheed-martin-receives-four-manufacturing-leadership-awards-300435173.html

SOURCE Lockheed Martin Aeronautics Company

Contact:
Lockheed Martin Aeronautics Company
Ken Ross
Phone: +1 817-763-4086
Email Contact
Web: http://www.lockheedmartin.com


Rating:


Review Article Be the first to review this article
Featured Video
Latest Blog Posts
Alex Carrick, Chief Economist at ConstructConnectThe AEC Lens
by Alex Carrick, Chief Economist at ConstructConnect
From Within the Herd (June 1, 2020) – Word Processing vs Meat Processing
Jobs
GIS Analyst #14713 for State of Missouri at Jefferson City,, Missouri
Mechanical Designer for TechnipFMC at Houston,, Texas
ROV Pilot II for TechnipFMC at Houston,, Texas
Geographic Information System Analyst II for State of Idaho at Boise, Idaho
Upcoming Events
BUILDINGSNY -postponed June 17-18, 2020 at Javits Center New York City NY - Jun 17 - 18, 2020
Urban Planning & Architectural Design for Sustainable Development – 5th Edition at Rome,Italy Roma Tre University Rome Italy - Jul 7 - 9, 2020
Cities’ Identity Through Architecture and Arts – 4th Edition at Rome,Italy Rome Italy - Jul 7 - 9, 2020
AEC Next Technology Expo + Conference (NEW DATE), at McCormick Place Chicago IL - Jul 27 - 29, 2020
Kenesto: 30 day trial
Context Capture
CADalog.com - Countless CAD add-ons, plug-ins and more.



© 2020 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise