Microsemi Enhances Radiation-Tolerant Space Product Portfolio with New LX7710 Diode Array and Recent QML Certifications for its Source Driver Device

Company Continues Commitment to Industry as Researchers Estimate 60 Percent More Satellites Will Be Launched by 2024

ALISO VIEJO, Calif., April 19, 2016 — (PRNewswire) — Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, today announced the newest member of its high-reliability space product portfolio, the LX7710 radiation-tolerant diode array. The LX7710 is the industry's first integrated solution of its kind offering eight diode pair channels designed specifically for satellites and other space applications. The company also announced its AAHS298B radiation-tolerant source driver  has achieved Qualified Manufacturers List (QML) Class V and QML Class Q qualifications from the Defense Logistics Agency (DLA) Land and Maritime.  The AAHS298B is often used in conjunction with Microsemi's new LX7710 and its other radiation-hardened and radiation-tolerant programmable logic products.

Microsemi Corporation.

The new LX7710 offers eight series connected diode pairs providing redundant protection should one fail in a short circuit event, ensuring reliability even in harsh space environments. The diodes within the integrated circuit (IC) are electrostatic discharge (ESD) protected and offer a minimum of 125 volts (V) breakdown voltage and can handle up to 700 milliamps (mA) of continuous current. The device is available in a 20 pin ceramic small outline integrated circuit (SOIC) package and is screened to meet stringent MIL-PRF-38535 Class V or Class B requirements. The LX7710 is designed for power OR-ing, redundant power sourcing, aerospace satellite manufacturing and military power electronics control applications, and can be used in combination with Microsemi's newly QML Class V and Class Q qualified source driver.

Microsemi's AAHS298B, which has been in production since 2012, can also be used in conjunction with the company's other radiation-hardened and radiation-tolerant products to implement redundant power management solutions. The radiation-tolerant source driver features eight non-inverting channels, with internal thermal shutdown. Capable of providing an interface from TTL, 5V or 12V logic systems to relays, motors, solenoids and other loads, the device adds the additional benefit of output transient protection/clamp diodes with sustaining voltages to 75V.

"The introduction of our new LX7710 radiation-tolerant diode array and the recent AAHS298B certifications by DLA Land and Maritime demonstrate Microsemi's continued commitment to our customers serving the satellite industry," said Shafy Eltoukhy, vice president and business unit manager at Microsemi. "We will continue to broaden and strengthen our radiation-tolerant product portfolio with the addition of innovative integrated solutions and rigorous industry certifications to ensure our solutions serve our customers' needs, particularly with regards to weight and board space reductions, while providing the highest level of quality and reliability."

The AAHS298B's recent Class V and Class Q QML qualifications signify the high-reliability device has achieved the highest level of criterion for space-level products. The devices must be able to pass the stringent Technology Conformance Inspection (TCI) tests required in the MIL-PRF-38535 performance specification.  This removes the need for customers to perform these tests, providing scheduling and cost benefits.  The QML qualification achievement allows designers across the entire spectrum of space designs, from low cost commercial and scientific applications to human rated and top priority government systems, to use the parts without cumbersome part selection justifications or source control drawings.

The combination of the AAHS298B and Microsemi's new LX7710 provides a unique logic-controlled redundant power switching solution. Both devices offer significant size and weight savings by providing a higher level of integration than previously available.  This enables space hardware designers to meet increasingly difficult demands for smaller and lighter equipment which results in launch cost savings. In addition to reduced weight and board space, the integrated solutions also offer customers increased reliability by eliminating separate discrete components. The ICs are being used on many key satellite programs such as the Joint Polar Satellite System and Orion, where usage of each device can be up to several hundred per satellite. 

According to Euroconsult's 2015 report titled, "Satellites to Be Built & Launched by 2024," 60 percent more satellites will be launched by 2024 versus the past decade. This increase is driven primarily by civilian government agencies as established space countries replace and expand their in-orbit satellite systems and more countries acquire their first operational satellite systems.

Product Availability
Microsemi's LX7710 radiation-tolerant diode array and its AAHS298B radiation-tolerant source driver are both available now. For more information, visit http://www.microsemi.com/existing-parts/parts/136653 and http://www.microsemi.com/existing-parts/parts/35, respectively, or contact Email Contact.

Microsemi Leading Space Innovation for More than Half a Century
With one of the industry's most comprehensive portfolios of space products, Microsemi provides radiation-tolerant field programmable gate arrays (FPGAs), radiation-hardened mixed-signal ICs, radiation-hardened DC-to-DC converters, precision time and frequency solutions, linear and POL hybrids, custom hybrid solutions, and rad-hard discretes including the broadest portfolio of JANS Class diodes and bipolar products. Microsemi is committed to supporting its products throughout the lifetime of its customer programs. The company continues to innovate and expand its portfolio, most recently adding its new LX7730 radiation-tolerant telemetry controller IC providing key functions for sensor monitoring, attitude and payload control, as well as its RTG4™ high-speed signal processing radiation-tolerant FPGA family. The RTG4's reprogrammable flash technology offers complete immunity to radiation-induced configuration upsets in the harshest radiation environments, requiring no configuration scrubbing, unlike SRAM FPGA technology. For more information about Microsemi's space products, visit http://www.microsemi.com/applications/space.

About Microsemi
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for communications, defense & security, aerospace and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and precise time solutions, setting the world's standard for time; voice processing devices; RF solutions; discrete components; enterprise storage and communication solutions, security technologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, Calif., and has approximately 4,800 employees globally. Learn more at www.microsemi.com.

Microsemi and the Microsemi logo are registered trademarks or service marks of Microsemi Corporation and/or its affiliates. Third-party trademarks and service marks mentioned herein are the property of their respective owners.

"Safe Harbor" Statement under the Private Securities Litigation Reform Act of 1995: Any statements set forth in this news release that are not entirely historical and factual in nature, including without limitation statements related to its newest member of its high-reliability space product portfolio, the LX7710 radiation tolerant diode array, the industry's first integrated solution of its kind offering eight diode pair channels designed specifically for satellites and other space applications, and its potential effects on future business, are forward-looking statements. These forward-looking statements are based on our current expectations and are inherently subject to risks and uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements. The potential risks and uncertainties include, but are not limited to, such factors as rapidly changing technology and product obsolescence, potential cost increases, variations in customer order preferences, weakness or competitive pricing environment of the marketplace, uncertain demand for and acceptance of the company's products, adverse circumstances in any of our end markets, results of in-process or planned development or marketing and promotional campaigns, difficulties foreseeing future demand, potential non-realization of expected orders or non-realization of backlog, product returns, product liability, and other potential unexpected business and economic conditions or adverse changes in current or expected industry conditions, difficulties and costs of protecting patents and other proprietary rights, inventory obsolescence and difficulties regarding customer qualification of products. In addition to these factors and any other factors mentioned elsewhere in this news release, the reader should refer as well to the factors, uncertainties or risks identified in the company's most recent Form 10-K and all subsequent Form 10-Q reports filed by Microsemi with the SEC. Additional risk factors may be identified from time to time in Microsemi's future filings. The forward-looking statements included in this release speak only as of the date hereof, and Microsemi does not undertake any obligation to update these forward-looking statements to reflect subsequent events or circumstances.

1 | 2  Next Page »

Review Article Be the first to review this article
Featured Video
Latest Blog Posts
Alex Carrick, Chief Economist at ConstructConnectThe AEC Lens
by Alex Carrick, Chief Economist at ConstructConnect
Multiple Layers to the Inflation Watch Story
Senior Project Architect for Gordon Prill, Inc at Sunnyvale, California
Electrical Designer for Dinter Engineering at Reno, Nevada
Electrical Engineer for Dinter Engineering at Reno, Nevada
Senior Highway Engineer for RS&H at Jacksonville, Florida
Construction Project Manager for Gordon Prill, Inc at Sunnyvale, California
BIM/CAD Specialist for Gordon Prill, Inc at Sunnyvale, California
Upcoming Events
ICSD 2021 : 9th International Conference on Sustainable Development, 8 - 9 September Rome, Italy at Roma Eventi, Pontifical Gregorian University Piazza della Pilotta, 4 Rome Rome Italy - Sep 8 - 9, 2021
Urban Planning & Architectural Design for Sustainable Development – 6th Edition at University of Florence Florence Italy - Sep 14 - 16, 2021
World Tunnel Congress 2021 at Copenhagen Denmark - Sep 20 - 24, 2021
NIBS Building Innovation 2021: Virtual Edition. at United States - Sep 27 - 29, 2021

© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise