NATEL EMS Solves Need for Increase in Production with Lean Manufacturability Solution

CHATSWORTH, Calif., Feb. 25, 2015 — (PRNewswire) —   NATEL EMS announces the release of its new whitepaper titled  NATEL EMS Solves Need for Increase in Production with Lean Manufacturability Solution, about the implementation of lean manufacturing concepts at its Ohio Valley Operations facility in 2014. The whitepaper focuses on overcoming obstacles during the process of introducing lean manufacturing into an ultra-high mix, low volume printed circuit board assembly area.

Logo - http://photos.prnewswire.com/prnh/20140226/LA72895LOGO

The paper describes how NATEL EMS needed to find a new approach for one of its medical customer's printed circuit board assembly cell in order to increase production from 75 to 200 finished pieces per day, with future projections ranging from 250 to 400 finished pieces per day. The challenge was to achieve this increase with the same equipment and within the same amount of time.

There are three key elements that contribute to continuous improvement: people, layout and process. To begin the improvements, OVO, guided by Victor Yamauchi, first trained its 147 employees in the Toyota Production System. Next, it adapted the layout of the cell to support continuous flow by implementing the 5S of the workplace: Sort, Straighten, Sweep, Standardize and Sustain.

Lastly, the process was adapted. This involved replacing of the batch mentality by arranging the process around a sequential continuous flow, as well as standardizing work in progress and pull manufacturing to eliminate overproduction. These process adaptations also allowed for immediate feedback, thereby facilitating quality control and, when necessary, quick correction in the event a defect is detected.

The most important conclusion is that the OVO workforce has become knowledgeable about continuous improvement and lean manufacturing. To quote one operator, "My job isn't to assemble a product; my job is to find the most efficient way possible to assemble a product."

As a result of the implementation of lean manufacturing concepts, the medical customer's cell at the OVO facility now produces 200 finished products a day and continues to look for improvements that will amp up productivity even further. Considering the success of the lean manufacturing implementation, NATEL's next goal is to apply these concepts to the remainder of the shop floor.

ABOUT NATEL EMS

NATEL EMS is a major independent manufacturer of a wide variety of electronic products, providing low to high volume production for its customers. As one of the largest and oldest privately held EMS companies in the U.S., NATEL EMS is known for solving tough engineering problems that result in high-reliability, high-quality electronics for customers in medical, defense, transportation and industrial fields. NATEL EMS is favorably positioned among mid-tier EMS manufacturers to "make amazing things happen." NATEL EMS holds and maintains industry specific certifications that include AS9100, ISO 13485, and ISO/TS 16949. Its MIL-PRF-38534 (DSCC) Class H and K certifications certify NATEL's expertise in designing and manufacturing microelectronic assemblies for space and mission-critical defense programs placing it in an elite group of defense and aerospace industry manufacturers. NATEL EMS, headquartered in Chatsworth, CA, has manufacturing locations in California, Nevada, Ohio and Mexico. To learn more, visit  www.NatelEMS.com or on Twitter, @NATEL.

 

To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/natel-ems-solves-need-for-increase-in-production-with-lean-manufacturability-solution-300041773.html

SOURCE NATEL EMS

Contact:
NATEL EMS
Heather Pierce, Marketing Associate, NATEL Engineering Co., Inc., 1 (818) 734-6500
Web: http://www.NatelEMS.com




Review Article Be the first to review this article

Featured Video
Jobs
Geodesign Manager for Design Workshop at Aspen, Colorado
Failure Analysis Engineer for Flextronics at Milpitas, California
Mechanical Engineer for Flextronics at Milpitas, California
Upcoming Events
Digital Construction Week 2020 at Excel London United Kingdom - Oct 21 - 22, 2020
2020 Design-Build Conference & Expo! at Gaylord National Resort & Convention Center National Harbor MD - Oct 28 - 30, 2020
Greenbuild 2020 at San Diego Convention Center San Diego CA - Nov 4 - 7, 2020
Kenesto: 30 day trial
Digital Cities
CADalog.com - Countless CAD add-ons, plug-ins and more.



© 2020 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise