Renesas Electronics Delivers Productivity Boost in Industrial Applications with the RZ/T1 Real-Time Processor Solution

Real-Time CPU with Up to 600 MHz Operation and R-IN Engine Brings Both Real-Time Control and Deterministic Network Connectivity for Industrial Equipment

SANTA CLARA, Calif. — (BUSINESS WIRE) — November 18, 2014 — Renesas Electronics Corporation (TSE:6723), a premier supplier of advanced semiconductor solutions, today announced the RZ/T1 Group, a new factory automation solution with built-in industrial network functionality for use in many industrial applications such as AC servo drives, motion controllers, inverter control and general industrial equipment that require high speed, responsiveness, and excellent real-time performance.

Renesas Electronics RZ/T1 Group of microprocessors, a new factory automation solution with built-in  ...

Renesas Electronics RZ/T1 Group of microprocessors, a new factory automation solution with built-in industrial network functionality for use in many industrial applications. (Photo: Business Wire)

“Increased demand for productivity in today’s factories requires improvements in performance and network connectivity,” said Ritesh Tyagi, vice president marketing, Renesas Electronics America. “The new RZ/T1 Series addresses these market needs by combining high-performance, real-time control and multi-protocol industrial Ethernet communication functions on a single chip.”

Traditional solutions such as high-frequency microprocessors (MPUs) with cache memory are unsuited for real-time control because of the unpredictability characteristics of cache memory. And, while microcontrollers (MCUs) with on-chip flash memory are likewise marketed for real-time control, the increasing performance requirements are driving them to hit their performance ceiling.

In addition, deterministic, open standard networks such as EtherCAT®, EtherNet/IP™, and PROFINET are becoming mainstream in all types of industrial equipment. Supporting such standards typically requires the use of a separate ASIC with dedicated communication functionality, which leads to increased system cost and circuit board footprint.

The new RZ/T1 Group of devices are built around the ARM® Cortex®-R4F core operating at up to 600 megahertz (MHz) and are configured with two regions of tightly coupled memory (TCM, Note 1), which is linked directly to the CPU core, removing the need for cache memory. TCMs support critical routines, such as interrupt handling routines or real-time tasks, ensuring the highest level of responsiveness with no cache latency. The RZ/T1 also integrates the R-IN Engine industrial Ethernet communication accelerator. It provides the same multi-protocol features as the highly regarded Renesas R-IN Series, with support for multiple industrial Ethernet communication standards, including EtherCAT.

The RZ/T1 devices likewise retain many of the peripheral functions of the Renesas RX Family and SH Family, making it easier for system manufacturers to design scalable industrial control equipment systems leveraging multiple Renesas architectures.

Key Features of the RZ/T1 Solutions:

(1) Cortex-R4F core operating at up to 600 MHz and high-speed, large-capacity tightly coupled memory linked directly to the CPU core for high-speed processing and excellent responsiveness.

The RZ/T1 Group is built around the ARM Cortex-R4F core (rated at 1.66 DMIPS/MHz), which is designed for real-time processing, can operate at frequencies up to 600 MHz, and features a single/double precision FPU for efficient math operation. There are two TCM regions – 512 K utilized for code and operation and 32 K for data, both with effectively no-wait access from the CPU (Note 2). There is an additional 1 MB of RAM for use in the application to support better partitioning and efficiency. In addition, there is a vectored interrupt controller (VIC) in hardware that delivers high-performance, low-latency interrupt handling, further boosting real-time performance. These configuration enhancements make it possible to build systems with high-speed processing and excellent real-time responsiveness superior to those using conventional MCUs with on-chip flash memory or microprocessors employing cache memory.

(2) R-IN Engine industrial Ethernet communication accelerator

The RZ/T1 Group includes devices equipped with the industry-proven Renesas R-IN engine, which incorporates an Ethernet accelerator and a real-time OS accelerator (HW-RTOS). The R-IN engine includes a dedicated CPU core running at 150 MHz and implements the functions of a real-time OS in hardware, and handles the communication and peripherals for system-level efficiency. The R-IN engine is designed to support multiple industrial Ethernet communication standards, including EtherCAT, EtherNet/IP, and PROFINET. The recently launched R-IN Consortium is expected to provide a variety of solutions from Renesas and partner vendors that will reduce the time needed to develop industrial equipment.

(3) Peripheral functions retained from proven Renesas MCUs for scalability, and improved new peripheral functions and safety functions for industrial equipment

The SH Family and RX Family of Renesas MCUs have a proven track record in the field of industrial equipment, and the RZ/T1 inherits many of the peripheral functions, including well-established timers and communication functions. This simplifies the development by leveraging prior designs using other Renesas architectures, thus improving time to market. To meet the demanding reliability and safety requirements of industrial equipment, the on-chip memory, including tightly coupled memory, incorporates ECC functionality. Additional safety functions, including a register write protection function to prevent overwriting of key registers in case of program runaway, an input clock oscillation stop detection function, and an independent watchdog timer function all help to simplify safety certification.

1 | 2  Next Page »

Review Article Be the first to review this article
Featured Video
Latest Blog Posts
Alex Carrick, Chief Economist at ConstructConnectThe AEC Lens
by Alex Carrick, Chief Economist at ConstructConnect
Multiple Layers to the Inflation Watch Story
Construction Project Manager for Gordon Prill, Inc at Sunnyvale, California
Electrical Engineer for Dinter Engineering at Reno, Nevada
Electrical Designer for Dinter Engineering at Reno, Nevada
Senior Project Architect for Gordon Prill, Inc at Sunnyvale, California
BIM/CAD Specialist for Gordon Prill, Inc at Sunnyvale, California
Senior Highway Engineer for RS&H at Jacksonville, Florida
Upcoming Events
ICSD 2021 : 9th International Conference on Sustainable Development, 8 - 9 September Rome, Italy at Roma Eventi, Pontifical Gregorian University Piazza della Pilotta, 4 Rome Rome Italy - Sep 8 - 9, 2021
Urban Planning & Architectural Design for Sustainable Development – 6th Edition at University of Florence Florence Italy - Sep 14 - 16, 2021
World Tunnel Congress 2021 at Copenhagen Denmark - Sep 20 - 24, 2021
NIBS Building Innovation 2021: Virtual Edition. at United States - Sep 27 - 29, 2021

© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise