Toshiba Launches High Current 3-Channel Half-Bridge Motor Driver

TOKYO — (BUSINESS WIRE) — August 7, 2014Toshiba Corporation (TOKYO:6502) today announced the launch of the 3-channel half-bridge driver IC “TB67Z800FTG” for brushless DC motors that supports high current[1] and can be controlled easily by an MCU. Mass production shipment starts today.

Toshiba: High current 3-channel half-bridge motor driver "TB67Z800FTG" (Photo: Business Wire)

Toshiba: High current 3-channel half-bridge motor driver "TB67Z800FTG" (Photo: Business Wire)

The new product is a 3-channel half-bridge driver IC incorporating 6 DMOSs[2]. It can control a three-phase brushless DC motor easily by turning the DMOS on and off with the input signals from an MCU.

Supplied in a small package, the new product is best suited for applications such as cooling fans with limited mounting space. Safety in driving the motor is enhanced by various circuits such as over current detection, thermal shutdown circuit.

Key Features of the New Product

  1. Shoot-through current protection
    Shoot-through current is prevented by applying the logic circuit that prevents the upper and lower DMOSs of the driver from being turned on simultaneously. This capability removes the responsibility from the microcontroller, thus reducing the load on the MCU.
  2. Small package
    Leadless VQFN package (5mm×5mm×0.9mm) enables the IC to be mounted on a limited mounting space of the applications such as small cooling fans. The thermal radiation pad is attached at the bottom to further enhance the cooling and contribute to improve radiating characteristics.
  3. Abnormality detection functions
    Over current detection, thermal shutdown circuit, and under voltage lockout circuit are incorporated to improve safety in driving motors.

Main Specifications

Product name     TB67Z800FTG
Power supply voltage (Operation range)     4 to 22V

Output current (Absolute maximum rating)

    3A
Built-in regulator circuit     5V (typ.) / 5mA (max.)
Package     VQFN36(5mm×5mm×0.9mm)

Note 1

   

High current: Power supply voltage range from 4 to 22V(Absolute maximum rating: 25V)/Maximum output current: 3A

Note 2

DMOS: Double-Diffused MOSFET

 

1 | 2  Next Page »



Review Article Be the first to review this article


Featured Video
Latest Blog Posts
Alex Carrick, Chief Economist at ConstructConnectThe AEC Lens
by Alex Carrick, Chief Economist at ConstructConnect
Canada Generates Jobs Creation Excitement in September
Jobs
Structural Engineer 2 (Engineer 2) for Los Alamos National Laboratory at Los Alamos,, New Mexico
Design Engineer (Engineer 1/2) for Los Alamos National Laboratory at Los Alamos,, New Mexico
Architect for Hutton at Wichita, Afghanistan
Structural Engineer for Kiewit at Lenexa, Kansas
Failure Analysis Engineer for Flextronics at Milpitas, California
3D Designer and Developer for Los Alamos National Laboratory at Los Alamos,, New Mexico
Upcoming Events
2020 Design-Build Conference & Expo! at Gaylord National Resort & Convention Center National Harbor MD - Oct 28 - 30, 2020
Beyond 2020 conference (virtual) at Gothenburg Sweden - Nov 2 - 4, 2020
ABX | ArchitectureBoston Expo at Boston Convention & Exhibition Center Boston MA - Nov 4 - 5, 2020
Greenbuild 2020 at San Diego Convention Center San Diego CA - Nov 4 - 7, 2020
Kenesto: 30 day trial
Digital Cities
CADalog.com - Countless CAD add-ons, plug-ins and more.



© 2020 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise