Peregrine Ships the RF Industry’s First Monolithic, 50 Watt Power Limiters

Peregrine’s UltraCMOS PE45140 and PE45450 Power Limiters Deliver Turnkey Protection Against Excessive RF Power and ESD Events in LMRs, Test and Measurement Devices and Wireless-Infrastructure Equipment

TAMPA, Fla. — (BUSINESS WIRE) — June 3, 2014 — IMS 2014 – In Booth #515 Peregrine Semiconductor Corp. (NASDAQ: PSMI), founder of RF SOI (silicon on insulator) and pioneer of advanced RF solutions, announces the availability of UltraCMOS® PE45140 and PE45450 RF power limiters. Peregrine’s power limiters represent the industry’s first turnkey, monolithic solutions to provide an alternative to discrete, PIN-diode limiters based on gallium arsenide (GaAs). Now shipping, these components offer repeatable and reliable protection designed for test-and-measurement, land-mobile-radio (LMR), wireless-infrastructure, military and radar systems.

“Peregrine is excited to deliver the industry’s first monolithic power limiters – UltraCMOS PE45140 and PE45450 – today,” says Kinana Hussain, senior marketing manager at Peregrine. “Because we were able to architect the entire solution onto a single chip, Peregrine’s programmable power limiters offer unique flexibility and unprecedented, robust RF protection to designers of test-and-measurement equipment, LMRs, wireless-infrastructure devices and military and radar systems.”

Peregrine designed the UltraCMOS PE45140 to accommodate the frequency ranges needed in military, LMR and radar applications. Specifically, this power limiter can protect RF front ends and low-noise amplifiers (LNAs) in LMRs; tactical radio receivers from intentional jammers in military warfare; and transceiver (TRX) modules in radiolocation, shipborne and air-traffic-control (ATC) radar systems. Designed for higher frequency ranges, the PE45450 can protect RF ports in test-and-measurement equipment and RF receivers in wireless-infrastructure equipment.

Both power limiters feature:

  • High maximum power handling up to 50 W
  • Form factor as much as eight times smaller than PIN diode solutions
  • Greater than 40 dB linearity (IIP3) improvement over PIN diode solutions
  • Fast response-and-recovery time of less than one nanosecond
  • Adjustable limiting threshold starting as low as +22 dBm and reaching as high as +35 dBm
  • Superior ESD ratings as high as 8 kV HBM
  • Dual-mode operation (power-limiting mode and power-reflecting mode)

Peregrine’s programmable power limiters feature two operating modes: power limiting and power reflecting. These modes can be selected through a low current, analog voltage on the control pin (VCTRL). In the power-limiting mode, the device is invisible to the load, and it features very low insertion loss and high linearity. When the incoming RF-signal power exceeds the limiting threshold set through the VCTRL pin, the device limits the input RF power. In the power-reflecting mode, the device reflects most of the incident power back to the source. The power-reflecting mode also uses an external power detector to sample the input RF power and toggle the VCTRL pin from power-limiting to power-reflecting mode for maximum protection. These power limiters also protect RF ports in unpowered or unbiased conditions.

Features, Packaging, Pricing & Availability

Peregrine’s PE45140 and PE45450 feature a wide frequency range from 20 MHz to 2 GHz, and 9 KHz to 6 GHz respectively. Both power limiters feature fast response-and-recovery time of less than 1 nanosecond and protect systems from RF power spikes and surges in harsh environments. The power limiters’ high ESD ratings of up to 8 KV (HBM) protect RF ports from ESD events and enable the devices to operate as ESD clamps. Because PE45140 and PE45450 do not need additional external components, such as DC blocking capacitors, RF choke inductors and bias resistors, these power limiters reduce the overall power-limiting-function footprint and BOM costs. Available now in a compact 12-lead 3x3mm QFN package, PE45140 costs $6.90 each in 10K quantity orders and PE45450 costs $7.80 each in 10K quantity orders. Evaluation kit boards are $130 each.

Visit IMS Booth #515 from June 3-5, 2014, for more information or to talk with a technical expert. Additional information can also be obtained online in the press kit.

                 
Specifications       UltraCMOS PE45140       UltraCMOS PE45450
Frequency       20 MHz to 2 GHz       9 KHz to 6 GHz
Adjustable Limiting Threshold (P1dB)       +22 dBm to +32 dBm       +25 dBm to +35 dBm
Insertion Loss      

• 0.20 dB @ 1 GHz

     

• 0.45 dB @ 2 GHz

       

• 0.60 dB @ 2 GHz

     

• 0.80 dB @ 6 GHz

Return Loss

• 16 dB @ 1 GHz

• 13 dB @ 2 GHz

       

• 10 dB @ 2 GHz

     

• 17 dB @ 6 GHz

Power Handling

• +40 dBm CW

• +40 dBm CW

       

• +47 dBm Pulsed

     

• +47 dBm Pulsed

Linearity (IIP3)       +64 dBm       +70 dBm
Response-and-Recovery time       <1ns       <1ns
ESD Rating       8 KV HBM       8 KV HBM

1 | 2  Next Page »



Review Article Be the first to review this article


Featured Video
Jobs
Geodesign Manager for Design Workshop at Aspen, Colorado
Failure Analysis Engineer for Flextronics at Milpitas, California
Mechanical Engineer for Flextronics at Milpitas, California
Upcoming Events
Digital Construction Week 2020 at Excel London United Kingdom - Oct 21 - 22, 2020
2020 Design-Build Conference & Expo! at Gaylord National Resort & Convention Center National Harbor MD - Oct 28 - 30, 2020
Greenbuild 2020 at San Diego Convention Center San Diego CA - Nov 4 - 7, 2020
Kenesto: 30 day trial
Digital Cities
CADalog.com - Countless CAD add-ons, plug-ins and more.



© 2020 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise