eSilicon Uses Magma to Tape Out 28-nm 1.5GHz Microprocessor Cluster for Embedded Platforms (Magma)

Talus-Flow-Manager-Based Reference Flow for GLOBALFOUNDRIES' 28-nm SLP Process and Quartz's Pattern Matching Capability Improve Quality of Results and Accelerate Turnaround Time

SAN JOSE, Calif., Nov. 10, 2011 (GLOBE NEWSWIRE) -- Magma® Design Automation Inc. (Nasdaq:LAVA), a provider of chip design software, today announced that eSilicon Corporation, the largest independent semiconductor value chain producer (VCP), used Magma software to tape out a three-way microprocessor cluster based on MIPS' leading-edge MIPS32® 1074Kf™ Coherent Processing System (CPS). Typical performance of the cluster is expected to be approximately 1.5GHz with worst-case performance of 1GHz. By leveraging Magma's Talus® IC implementation platform and the Talus-Flow-Manager-Based Reference Flow for GLOBALFOUNDRIES' 28nm-SLP process technology, eSilicon was able to achieve an impressive performance goal while optimizing power consumption. The Magma Quartz™ DRC and Quartz LVS products' support for GLOBALFOUNDRIES' DRC+ (a silicon-validated, yield-critical pattern-based design for manufacturing flow) streamlined physical verification of the chip.

"Magma's world-class support and state-of-the-art design software for advanced nodes has been a key factor over the years in enabling eSilicon to achieve fast netlist-to-GDSII cycle times and this tapeout was no different," said Hao Nham, vice president of Engineering at eSilicon. "Magma engineers worked side-by-side with our top designers and GLOBALFOUNDRIES to customize the design flow. This dedicated support and flow flexibility made it easier for us to harden the high-performance cores and get them to run properly in a cluster and a new process technology."

"Enabling semiconductor developers to meet the toughest power, performance, area and turnaround time targets is one of Magma's key strengths and a particular focus for us," said Premal Buch, general manager of Magma's Design Implementation Business Unit. "eSilicon's repeated success using our software demonstrates that Magma is still the technology leader for advanced IC design and highlights the results that eSilicon can deliver to users of its unique services."

Talus and Quartz: Advanced Technology, Comprehensive Foundry Support

The tightly integrated Talus® platform provides eSilicon with an advanced IC implementation solution that addresses the myriad design challenges at the 28-nanometer (nm) node and beyond. This highly convergent implementation flow provides advanced crosstalk avoidance and correction technology, accelerating design cycles. With seamless access to the sign-off-accurate timing analysis and extraction capabilities of the Tekton™ platform engineering change order (ECO) runtimes are also minimized.

To streamline tool and process node adoption and ease flow rollout, Talus includes the Talus Flow Manager. This unique utility provides a ready-to-use, GLOBALFOUNDRIES-qualified, 28-nm netlist-to-GDSII design flow. The Talus Flow Manager also features the Talus Visual Volcano™, a technology designed to help designers make better decisions faster. The Talus-Flow-Manager-Based Reference Flow for GLOBALFOUNDRIES' 28-nm SLP process provides unique visualization capabilities that enable chip developers to quickly and easily import an existing design, then analyze and evaluate its performance in the 28nm-SLP process. With this unique reference flow mutual Magma and GLOBALFOUNDRIES customers can better evaluate the benefits of moving to the 28-nm node.

In addition, the Talus Flow Manager easily integrates with Magma's Quartz DRC and Quartz LVS physical verification products. The Quartz products' support for GLOBALFOUNDRIES' DRC+ flow allows chip developers such as eSilicon to significantly accelerate the identification of 2-dimensional (2D) yield detractors and complex manufacturing issues with comparable accuracy to full-chip lithography process simulations. Tight integration of Quartz DRC and Quartz LVS with Magma's Talus platform fully automates fixing and enables fast and easy deployment of an efficient and convergent analyze-and-repair methodology.

About Magma

Leading semiconductor companies worldwide use Magma's electronic design automation (EDA) software to produce chips for a wide variety of vertical markets including tablet computing, mobile devices, electronic games, digital video, networking, military/aerospace and memory. Silicon One, Magma's technology solutions for emerging silicon, address time to market, product differentiation, cost and performance while making silicon more profitable. Magma products include software for digital design, analog implementation, mixed-signal design, physical verification, circuit simulation, characterization and yield management. The company maintains headquarters in San Jose, Calif., and offices throughout North America, Europe, Japan, Asia and India. Magma's stock trades on Nasdaq under the ticker symbol LAVA. Follow Magma on Twitter at and on Facebook at Visit Magma Design Automation on the Web at

Magma and Talus are registered trademarks, and Flow Manager, Quartz, Tekton and Visual Volcano are trademarks of Magma Design Automation Inc. All other product and company names are trademarks or registered trademarks of their respective companies.

Read the complete story ...

Review Article Be the first to review this article
Featured Video
Latest Blog Posts
Alex Carrick, Chief Economist at ConstructConnectThe AEC Lens
by Alex Carrick, Chief Economist at ConstructConnect
Canada Reached Some Labour Market Milestones in August
Senior Highway Engineer for RS&H at Jacksonville, Florida
ASIC Architects and Hardware Engineers at D. E. Shaw Research for D. E. Shaw Research at New York, New York
BIM/VDC Coordinator for MBH Architects at Alameda, California
Director, Industrial Machinery Solutions- SISW PLM for Siemens AG at Livonia, Michigan
Product Design Engineer - Softgoods for Apple Inc at Cupertino, California
GIS Specialist for Schneider Geospatial at Indianapolis, Indiana
Upcoming Events
World Tunnel Congress 2021 at Copenhagen Denmark - Sep 20 - 24, 2021
AGC Equipment, Technology & Construction Solutions Expo at Marriott Orlando World Center Orlando FL - Sep 21 - 23, 2021
Greenbuild International Conference + Expo at San Diego convention Center San Diego CA - Sep 21 - 23, 2021
Building Innovation 2021 Resilience Sessions Virtual at United States - Sep 27 - 29, 2021

© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise